audios for tag reader

You must then sync the audio to your windows 8 media player 12 codec Tag Reader by clicking the "Save to Tag" button.
Please Note: If you are seeing the "Save to Tag" button grayed out like the picture above.
Once you have reached that limit, you will have to remove one title to be able to add another.
Updating the firmware on the Tag Reader should resolve this issue.Download the LeapFrog Connect Application for LeapReader at m/connect; it will walk you through the setup process for your LeapReader, including downloading additional Companion Audio for your device.The LeapFrog Connect software for this product is offered as-is.There is a storage limit for audio on your Tag Reader.Make sure the country is set to the country where your book was purchased.(See example in picture below.).Click the "Reset" button.To access the audio downloads page for your child's books, you will need to select your childs name under "Tag".When the Reset is complete, disconnect the Tag Reader and try the audio again.This can be found in the LeapFrog Connect Application.Step 1: To Download the audio file you must have the LeapFrog Connect Application for the Tag Reader installed. .Power on and plug in the Tag Reader.

Step 2: Launch the LeapFrog Connect Application by clicking the icon on your computer.You can also touch an inside page of your books with your LeapReader and then connect the device to the computer via USB cord; the books' Companion Audio will then download automatically to your LeapReader after the LeapFrog Connect application opens on your desktop.LeapPad3, leapReader, leapReader Junior, leapStart, leapster Explorer, leapTV.Step 5: In the My Toys screen, click the orange button on the Tag card.Step 7: You will then need to select the audio for the book you would like on your Tag Reader System.My Pal Scout/Violet, other Products, tag Reader).Note: The Tag Reader was last sold in 2013 and is no longer supported.Step 6: After downloading the file from the Audio Downloads page, you must go to the "On My Tag" page and transfer the file from your computer to the Tag Reader.Please make sure your Tag Reader is connected, and powered.Step 4: On the LeapFrog Home screen, click the "enter" button in the My Toys box near the top of the screen.If you are certain you have synced the audio file from your computer to your Tag Reader and are still experiencing difficulty, check the country setting at the top of the Audio Download page. .
Step 3: Connect your Tag Reader to the computer with the USB cord and turn.
Please also Note: The same book title in two different countries will have different audio files.